- Make sure all parts are completed before starting assembling.
- Make sure outfeed has space available.
- If glue squeezes out in corners—DO NOT WIPE OFF!!
- If glue drips on panel—DO NOT WIPE OFF, but circle glue, and sand off when dry.
- Never leave any door UN-clamped for more than 5 minutes!
- Turn Center Clamp on when clamping doors w/ TDL’s or Mullions, otherwise keeped turn off.
- Use 3rd Hands when clamping a Door w/ TDL’s or mullion in only the upper or lower half of the door.
Skip to content
Good's Millwork SOPs 