American Glass Options

Inside Contact: Send quote requests and PO’s to sales@americanglassinc.com (417) 866-8361

IG Warranty

IG 5 year if hot melt butyl, 10 if silicone.

4-11-19 Energy Surcharge is 9% above price listed below.

They need 11″ on diagonal (one way) to temper 11 3/16″ if shaped.

They do not deliver if orders total under $300 (but are willing to consider, if close, like $254). Crating costs $200-$300.

The thinnest they temper is 5/32″.

American shows the shapes of their pieces on their acknowledgements with texture side up.

IG:

They can do…

Bevel

A 1 ¼” bevel on shape is $1.43 per inch.  A 1 ¼” bevel on straight is $ .50 per inch

Aquatex

” —$ sq. ft. —3 sq. ft. minimum, 60″ x 84″ maximum
Bronze Reflective
1/4″ —$8.37 sq. ft ($8.84 shaped), 3 sq. ft. minimum,
11/16″ IG —$13.20 ($21.78 shaped), 100 3/8″ x 126 3/8″

Clear-our cost

¼” —$3.12 sq. ft. —3 sq. ft. minimum, 72″ x 144″ maximum
3/8” —$9.97 sq. ft. —3 sq. ft. minimum, 72″ x 144″ maximum
½” —$8.98 sq. ft. —3 sq. ft. minimum, 72″ x 144″ maximum

Low-E-our cost

¼” —$6.68 sq. ft. —3 sq. ft. minimum, 72″ x 144″ maximum
½” —$11.81 sq. ft. —3 sq. ft. minimum, 72″ x 144″ maximum

Low Iron – our cost

¼” —$9.17 sq. ft. ,  3 sq. ft. minimum,  72” x 144” maximum

3/8” —$12.68 sq. ft. , 3 sq. ft. minimum, 72” x 144” maximum

½” —$17.60 sq. ft. , 3 sq. ft. minimum, 72” x 144” maximum

Mirrorpane (1-way mirror)
1/4” —$22.46 sq. ft. —3 sq. ft. minimum, 72″ x 130″ maximum
Polar White (7%)
Rain
3/16” is thinnest —3 sq. ft. minimum, 72″ x 84″ maximum

Satin/Frosted/Sandblasted with clear

5/8” —$16.69 sq. ft. —3 sq. ft. minimum, ?” x 144″ maximum

These kinds of glass are TOO expensive:

Reeded/fluted

High number of small pieces

Flemish, IF LOTS of small pieces.

IG $25.16 per sq. ft. w/3 sq. ft. min. 72″ x 84″ max size

1/4″ $18.15 per square foot w/3 sq. ft. min. 72″ x 84″ max size.

They can also get flemish in 5/32″.

Shaped is more, but it’s more like a pattern charge, instead of a set price/ square foot.

Note on trimming:

We can go full length unless it is a shape, and then we need at least 1” to be able to cut the shape out.  If you don’t need the full length it needs to be at least ½” smaller on ¼” glass to be able to cut, for example we can cut a piece 71 ½” or less, or 72”.

Grill Between Glass: We offer 5/8” and ¾” grids in White, Tan, Champagne, Bronze and Black colors.

Picture 1          Picture 2          New Tempering Logo          2-25-25

Info on Customer-Supplied Templates

Mirror, edgework options:

Without specifying edgework this mirror would have a raw sharp edge
Flat Polish will give the mirror a clean finished edge with no chips
We can also do a bevel on the mirror- like you have seen on IG units.
Seamed Edge is just a utility edge. The edge is not guaranteed to not have chips or be “pretty”

They cannot do:

Antique

Baroque “It has bubbles in it, and cannot be tempered”.

Cotswald

Hammer (closest would be aquatex)

Seedy

Water